|
中京化成電子部品LED離型劑透明環氧樹脂傳遞模塑用離型劑CJ-5
透明環氧樹脂傳遞模塑用離型劑
?
TransparentEpoxy Resin Mould Release Agent for Transfer Mould Us
DIOCOAT
日本第一個開始研發并生產LED行業離型劑的公司
日本和臺灣LED行業占有率第一的惠業離型彎
優 Advantages
DIOCOAT系列擁有以下像點g advantages
①)高離型功能 Hish Mould Release Function
不僅擁有高離型功能，還能減少離型劑導致的粘黏現象，
in addition to the high mould release function, this product can also reducethe mucosity caused by mould release agent.
用途Use
環氧樹脂(全部發光二極管、各種IRDA、傳感器類)傳遞模塑
成型全部熱硬化樹脂
Epoxy Resin (Alllight-emitting Diode, all kindsoflRDA, Sensortype)Transfer MouldingAllthermosettingresins
保持外觀美觀，降低產品不良率Maintenance of exterior appearance and reduction of ffaction defective of products.
離型力的空白多，成品率穩定
More margin ofrelease power, stable rate of finished products
2)防止卷人的功能 Function of lmmbxture Prevention
→成型時，難以被成型材料衝走It is hard to be washed away in the course of mouldins
可以減少空隙等氣泡，保持外觀美觀
Reduction of void and other bubbles and maintenance of beautiful appearance
()適合傳遞模塑成型的細微功能 Remote Functon Suitable for Transfer Mouk→對應成型時産品有可能產生的角脫落和轉子末端部位的故障Corespond to the possible angle shedding and the defectin the part of Runner End
可以實現總體上的成本降低
It can achieve overall cost reduction
包裝外觀Exterior Appearance
噴務型 420ml(一箱24罐)Aerosol Type 420ml (24 cans/box
|